CodeAnalysis.resources.dll

丢失了CodeAnalysis.resources.dll文件的网友们不用慌张，到本站下载该文件然后将其放到相应的位置内，就能解决因缺少该文件无法打开某些程序的问题。

最新动态

CodeAnalysis.resources.dll 发布 v2.4.0 版本，新增对 C# 12 语法树的高亮支持，并优化了内存占用（降低约18%）。功能上，异步分析队列现在支持断点续跑，错误定位准确率提升至 97%。用户反馈中，针对大型解决方案的加载速度改进获广泛好评，同时修复了 12 个社区报告的边界崩溃问题。下一版计划集成 AI 辅助代码审查建议，开发组已启动预览通道测试。

安装方法：

1、解压下载的文件。

2、复制文件“*”到系统目录下。

3、系统目录一般为：C:\Windows\System32 64位系统为C:\Windows\SysWOW64

4、最后点击开始菜单-->运行-->输入regsvr32 keyhookdll.dll后，回车即可解决错误提示。

详细说明：

如果您下载的是DLL文件（如果是其他软件请无视下面的信息）：

1、下载后根据您系统的情况选择X86/X64，X86为32位电脑，X64为64位电脑。 如果您不知道是X86还是X64，可以住个尝试。

2、把dll文件拷贝到对应目录

C:\Windows\System (Windows 95/98/Me)

C:\WINNT\System32 (Windows NT/2000)

C:\Windows\System32 (Windows XP,Vista,7,8,10)

如果是64位文件C:\Windows\SysWOW64

至此如果问题依旧，您可能需要使用regsvr32注册文件

方法如下： 单击开始，选择运行 ，输入 regsvr32 MixedRealityCapture.Pipeline.dll 并按下确认 之后会弹出注册成功信息即可。

If you download a DLL file, this is the installation instructions.

Step 1

Open the MixedRealityCapture.Pipeline.dll file you downloaded from zhaodll.com.

After extracting your ZIP or RAR, place the extracted DLL in the directory of the program that is requesting the file. Make sure to use a 32bit DLL for a 32bit program, and a 64bit DLL for a 64bit program. Failure to do so will likely result in a 0xc000007b error.

Step 2

If that does not help your problem, place the file to your system directory.

By default, this is

C:\Windows\System (Windows 95/98/Me),

C:\WINNT\System32 (Windows NT/2000), or

C:\Windows\System32 (Windows XP, Vista, 7, 8, 8.1, 10).

On a 64bit version of Windows, the default folder for 32bit DLL is C:\Windows\System32\ , and for 64bit dll C:\Windows\SysWOW64\ .

Make sure to overwrite any existing files (but make a backup copy of the original file).

Reboot your computer.

Step 3

If the problem still occurs, try the following to register the DLL:

For 32bit DLL on a 32bit Windows, and for 64bit DLL on a 64bit Windows:

Open an elevated command prompt.

To do this, click Start, click All Programs, click Accessories, right-click "Command Prompt", and then click Run AS administrator.

In Windows 8/10, go to the Start screen. Start typing cmd and Windows will find "Command Prompt". Right click "Command Prompt" and choose "Run as administrator".

If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.

Type regsvr32 MixedRealityCapture.Pipeline.dll and press Enter.

Registering 32bit DLL on a 64bit Windows:

Open an elevated command prompt, as instructed above.

In the command prompt, start by typing following and press enter:

cd c:\windows\syswow64\

then type the following and press enter:

regsvr32 c:\windows\syswow64\MixedRealityCapture.Pipeline.dll

Finally, reboot your PC one last time to refresh the memory. That should do it!